Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED WOOD PROTECTORS WOOD PRESERVATIVES
MULTI-SURFACE SEALERS MASONRY SEALERS SANDING SEALERS
FABRIC SEALERS/WATERPROOFERS MISC PRIMERS/SEALERS
Sort By:
1 2 3 ... 8
Zinsser 2008 Bulls Eye 1-2-3 Primer/Sealer Zinsser 3688 Covers Up Primer/Sealer WaterSeal 10100 Multi-Surface Waterproofer
Zinsser Primer, Series: Bulls-Eye 1-2-3, 13 oz, Aerosol Can, Water Base, Styrene Acrylate Copolymer Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Spray, -156 Deg F Flash Point, 502 g/l VOC, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Zinsser Ceiling Paint and Primer, Series: COVERS UP, 13 oz, Aerosol Can, Solvent Base, Acrylic Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 12 - 15 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 476 g/l VOC, 70 - 80 Deg F, Suitable For Use With: Primed or Previously Painted Ceiling Tiles, Drywall, Cured Plaster, Wood, Aluminum, Iron, Steel and Galvanized Metal and PVC, For Interior and Exterior Applications WaterSeal Multi-Surface Waterproofer, 12 oz Capacity, Aerosol Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method
PRIMER SEALR OBS ODRLESS SPRAY Thompsons TH.010501-18 Sports Seal Fabric Protector Kilz 10004 Stain Killer Primer Sealer
Fast drying enamel under coat. Seals porous surfaces so less topcoat is needed. Hides stains such as water stains, graffiti, ink, tannin, nicotine, smoke, pencil and crayon. Adheres to glossy surfaces without sanding. Use on drywall, plaster, paneling, wood, stucco and metal. Use with any oil-base or water-base architectural paint. Provides long-lasting, maximum strength waterproofing protection for outdoor sporting, camping, hunting, and boating surfaces. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. Kilz Primer Sealer, Stain Killer, Kilz, 13 oz Capacity, Aerosol Can Packing, Oil Base, White, Mild Odor/Scent, Application Method: Spray, -156 deg F Flash Point, For Interior Use
Rustoleum 290971 Bulls Eye ? 123 Plus Primer/Sealer Kilz Upshot 10007 Primer Sealer Masterchem 10444 Kilz Odorless Primer/Sealer
Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 13 oz, Aerosol Can, Water Base, Acrylic Modified Alkyd Resin, Liquid, Gray, Smooth, Solvent Like Odor/Scent, 10-12 sq-ft/Can Coverage, 30 min Drying Time, Application Method: Spray, -20 Deg C Flash Point, 480 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces Kilz Upshot Primer Sealer, Kilz, Upshot, 10 oz Capacity, Can Packing, Oil Base, 18 sq-ft Coverage, 15 min Drying Time, -156 deg F Flash Point, Titanium Dioxide, Talc, Magnesium Silicate Hydrate, Aliphatic Hydrocarbon, Rutile, Silicate, Mica Composition, For Eye Protection, Blocking Most Ceiling Stains Like Water, Smoke and Grease KILZ Odorless Primer Sealer, 13 oz, Aerosol Can, Oil Base, White, Solvent Odor/Scent, 20 - 25 sq-ft Coverage, Application Method: Spray, -156 Deg F Flash Point, 60 % VOC, 50 - 90 Deg F, For Offices, Schools, Dining Areas, Apartments and Other Areas
WaterSeal TH.041800-18 Waterproof Wood Sealer Rustoleum Cover-Stain Primer Sealer Masterchem L101348 Kilz Complete Primer/Sealer
WaterSeal Wood Sealer, Waterproof, 11 oz Capacity, Aerosol Can Packing, Sprayer Dispenser, Liquid, Clear, Mineral Spirit Odor/Scent, Composition: Med. Aliphatic Hydrocarbon Solvent, Propane, Butane, Heavy Paraffinic Oil, 0.72 Specific Gravity, -20.2 deg F Flash Point, >5 deg C, ASTM D4446, NIOSH/MSHA Approved, 25 sq-ft/can Coverage Area Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood KILZ Complete Primer Sealer, Aerosol Can, Oil Base, Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 20 - 25 sq-ft Coverage, 15 - 30 min Drying Time, 7 - 8 Specific Gravity, -156 Deg F Flash Point, <12 VOC, 50 -90 Deg F, Suitable For Use With: Cast Iron, Wrought Iron and Steel, For Interior and Exterior Applications
Thompsons TH.010502-18 Fabric Seal Fabric Protector WaterSeal TH.024104-14 Multi-Surface Waterproofer Masterchem 10002 Extra Strength Stain Killer Primer Sealer
Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. WaterSeal Multi-Surface Waterproofer, 1 qt Capacity, Can Packing, 2.99 lb/gal VOC, Clear, 24 hr Drying Time, 48 hr Application, Media: Carbon Dioxide, Dry Chemical and Alcohol Foam, Composition: Med. Aliphatic Hydrocarbon Solvent, 0.97 Specific Gravity, 40 deg F Application, Applicable Materials: Wood, Concrete and Brick, Curing Method, Resists Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces
Kilz 20002 Primer Deft 015-13 Lacquer Sanding Sealer Wolman Classic II Woodlife Wood Preservative
Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Deft Lacquer Sanding Sealer, 12 oz Capacity, Aerosol Spray Packing, Liquid, Solvent Odor/Scent, 30 Min Drying Time, Application Method: Brush or Sprayer, For Interior Application Wolman Wood Preservative, Water Based, Series: Classic II, Woodlife, 1 qt Capacity, Can Packing, Brush, Roller, Pump Sprayer Dispenser, Liquid, Clear, Mild Odor/Scent, Composition: Ethylene Glycol, 3-Iodo-2-Propynyl Butyl Carbamate, 1.0047 Specific Gravity, >200 deg F Flash Point, <250 g/l VOC, 50 - 90 deg F, EPA Registered, MSHA/NIOSH Approved
PRIMER SEALR SHELLAC BS 13OZ  Rustoleum Cover-Stain Interior/Exterior Primer Sealer WATER REPELLENT CAR INTERIOR
Zinsser Primer Sealer, Series: B-I-N, 13 oz, Aerosol Can, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 15 min to Touch, 30 min to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 551 g/l VOC, 70 Deg F, Suitable For Use With: Ceramic Tile, Glass, Metal, Plastic and Hardboard, For Interior Applications Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood NeverWet Liquid Repelling Treatment, Series: Rust-Oleum, Auto Interior, 11 oz Capacity, Bottle, Liquid, Clear, Solvent Like Odor/Scent, Composition: Ethylene Glycol Methyl Ether, 7.8 pH, Standards: OSHA 1910.134, ANSI Z88.2, 20 - 50 sq-ft Coverage Area, For Leather, Cloth, Synthetic and Natural Fibers
California 50600-4 Primer/Sealer Kilz 13002 Primer Zinsser 249019 Bulls Eye Zero Primer/Sealer
FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Eco-friendly, zero VOC, water-base formula, sticks to all surfaces, blocks and seals stains, graffiti and tannin bleed, fast dry time, recoat in 1 hour. Approximately 400 sq. ft. per gallon depending on application method and surface porosity.
Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer Drylok 27512 Latex Based Masonry Waterproofer Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer
Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Drylok Masonry Waterproofer, Latex Based, Series: 27512, White, 1 qt Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer
Kilz 10042 Interior Primer Sealer Zinsser 249727 Smart Prime Primer/Sealer Majic 8-1091 Barricade Primer and Paint
Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling Offers the performance of an oil-base primer in an advanced water-base formula. Combines stain blocking power with fast-dry convenience, exceptional flow and leveling and adheres to glossy surfaces without sanding. Resists rewetting to block water-soluble stains like an oil-base primer and seals oil-soluble stains. LEED compliant. Covers approximately 350 to 400 sq. ft. per gallon depending on surface type. For drywall, plaster and textured surfaces, general maintenance and "cleanup" of wallboard surfaces. Provides a two coat system on new drywall. Covers up to 30 sheets of drywall, 1,000 sq ft per 5 gallons. Dry time - touch 1 hour, recoat 4 hours. Water clean up.
   
 
1 2 3 ... 8